WTB > 3 bank drop target assembly for vette

[Hilton]

I recently picked up a vette and apparently there is still coding to swap out the 2 standups on the left for drops.
I am still trying to research and figure out exactly what works but form the sounds of it a drop assembly from pre 92 would work.

Here is some old online info.
http://www.planetarypinball.com/mm5/Wil ... rvette.htm

In particular Clay says "Opto style 3-bank drop targets work fine! You do NOT have to use microswitch drop targets. The only stipulation to this is the opto drop targets MUST have a LM339 chip mounted on the drop target opto board (newer drop target banks, 1992 and later, have the LM339 remotely mounted, and can not be used). For example, the drop target I used was from a 1990 Bally "Radical" game. This 3-bank drop target used the "U" shaped optos, and had a LM339 chip mounted right on the board. The wiring to the opto board was simple"

Anyone have something laying around that will fit the bill? please let me know.

TIA

[Hilton]

found one from a pool sharks that should work.

thanks