Megatouch EVO 2011 repair needed

Tech Help, Restorations, Refurbishments, "Shop Out" Photos, Notes
Post Reply
bmaster31
Posts: 49
Joined: Tue Apr 12, 2016 10:59 am
Contact:

Megatouch EVO 2011 repair needed

Post by bmaster31 »

I have a friend who's megatouch EVO stopped working. From what he describes it sounds like the power supply died. He's called around to arcade and coin op vendors and none will touch it. Any leads on somone willing to repair this machine would be appreciated.

Thanks!

User avatar
KingPin Games
Posts: 484
Joined: Fri Jun 21, 2013 10:54 am
Location: WI Dells/North Freedom, WI
Contact:

Re: Megatouch EVO 2011 repair needed

Post by KingPin Games »

definitely start with looking at the capacitors on the motherboard. if any of them are bulging i would start there.

also, there is a CR-2032 battery on the motherboard, if this battery dies (falls below 3.00vdc) then the game will not auto start.

he could also get a power supply tester like this

https://www.amazon.com/Optimal-Shop-Sup ... ics&sr=1-3

this would let him know if the power supply is powering on. the power supply could still have an issue under load, but if he doesn't get any kind of reading with this tester plugged in, then it would be a power supply issue.
Christopher
KingPin Games
www.KingPinGames.net
Sales@KingPinGames.net
608-393-2299 cell

Authorized JJP, Stern, Spooky, Chicago Gaming, American Pinball, Raw Thrills, Namco, Incredible Technology, Pipeline Games

Post Reply