System 1 Repinning

Tech Help, Restorations, Refurbishments, "Shop Out" Photos, Notes
Post Reply
JohnH
Posts: 68
Joined: Mon Mar 31, 2014 8:37 pm
Location: Sussex, WI
Contact:

System 1 Repinning

Post by JohnH »

Has anyone come up with an alternative for the way too fragile (and way too expensive) Molex pin extraction tool?

Blast Off, Space Mission, Joker Poker (SS), Viking, Skateball, Whirlwind
Eric_S
Posts: 499
Joined: Sat Jan 18, 2014 9:02 am
Location: Oshkosh, WI
Contact:

Re: System 1 Repinning

Post by Eric_S »

I picked up a set of cheap jeweler's screwdrivers and filed it down so it was narrow enough to fit into the molex housing.
tullster
Posts: 455
Joined: Wed Jun 26, 2013 12:55 pm
Contact:

Re: System 1 Repinning

Post by tullster »

What Eric said or your local auto parts store should have these. The 56500 might work and is about $15, and the other ones are about $20
608255DC-65D5-4D0C-BE37-9AEDAD46D685.jpeg
Not sure how to flip the picture!
User avatar
ralphwiggum
Posts: 1939
Joined: Mon Jun 17, 2013 3:46 pm
Location: Helenville, WI
Contact:

Re: System 1 Repinning

Post by ralphwiggum »

I like using the dental pick sets that hardware stores sell. Many of them are angled, so it makes extraction super easy because you can use leverage from the angle to get a form push out.
Current Collection
Demolition Man, Genie, Pennant Fever, Sinbad, Teenage Mutant Ninja Turtles, Fish Tales, Wheel of Fortune
User avatar
northvibe
Posts: 44
Joined: Wed Dec 27, 2017 3:49 pm
Contact:

Re: System 1 Repinning

Post by northvibe »

Yup. I have the cheap thin sheet metal removal tool with a plunger tip on the end, but @#$@#$ I bent the tip already of the tool....just isn't strong/thick enough. I have a pic set for the ones that don't require the full push in. I'll need to get a jeweler set to sand down.
Pinballs - MMr, MBr, TNA, CCr, Multimorphic P3, Metpro, Playball, Sopranos
Post Reply