Victory!ralphwiggum wrote:Sounds like you got it.... While the board is out, it would be a good time to look around for any cracked/cold soldered joints. Also, take a good look at the GI pins while it is out, if they are starting to tarnish/char, now is a good time to replace them....
Checked all the solder joints, all the pins and everything looked great.
Put the board back in and everything works perfectly.
Checked all the TPs on the board and we've got good voltage everywhere.
This was the confidence builder I needed when it comes to board work.
Granted it was only a BR but its a start.