1978 Kiss Machine

Tech Help, Restorations, Refurbishments, "Shop Out" Photos, Notes
Post Reply
Pinball_Rookie
Posts: 7
Joined: Mon Nov 05, 2018 2:21 pm
Location: Oshkosh, WI
Contact:

1978 Kiss Machine

Post by Pinball_Rookie »

Recently purchased a 78 machine, which is my very first machine. The coin slot works, but not able to post any credits to start the game. If anyone has any pointers or insight I sure would appreciate it. Thanks!
User avatar
ralphwiggum
Posts: 1939
Joined: Mon Jun 17, 2013 3:46 pm
Location: Helenville, WI
Contact:

Re: 1978 Kiss Machine

Post by ralphwiggum »

If you open the coin door, are you able to trigger the arm for each coin slot to manually add a credit? What does it do when you do this?
Current Collection
Demolition Man, Genie, Pennant Fever, Sinbad, Teenage Mutant Ninja Turtles, Fish Tales, Wheel of Fortune
Eric_S
Posts: 499
Joined: Sat Jan 18, 2014 9:02 am
Location: Oshkosh, WI
Contact:

Re: 1978 Kiss Machine

Post by Eric_S »

Make sure none of the tilt switches are in the wrong position. Maybe re-seat the big square molex connector for the coindoor wiring. Make sure the connectors on the MPU are properly pressed onto the board.
Pinball_Rookie
Posts: 7
Joined: Mon Nov 05, 2018 2:21 pm
Location: Oshkosh, WI
Contact:

Re: 1978 Kiss Machine

Post by Pinball_Rookie »

Thanks for the feedback. I've checked the wire connections with the coin wire harness and back to the MPU and all seem to be tight. I cannot manually trigger credits, so any other thoughts? I just got this game yesterday, so this is all new to me! :)
User avatar
ralphwiggum
Posts: 1939
Joined: Mon Jun 17, 2013 3:46 pm
Location: Helenville, WI
Contact:

Re: 1978 Kiss Machine

Post by ralphwiggum »

Run a switch test as outlined here-
http://techniek.flipperwinkel.nl/ballys ... 3.htm#diag

Do you have any stuck switches reporting? Is the tilt switch (as Eric Mentioned) reporting as closed?
Current Collection
Demolition Man, Genie, Pennant Fever, Sinbad, Teenage Mutant Ninja Turtles, Fish Tales, Wheel of Fortune
Pinball_Rookie
Posts: 7
Joined: Mon Nov 05, 2018 2:21 pm
Location: Oshkosh, WI
Contact:

Re: 1978 Kiss Machine

Post by Pinball_Rookie »

How would one determine that?
User avatar
ralphwiggum
Posts: 1939
Joined: Mon Jun 17, 2013 3:46 pm
Location: Helenville, WI
Contact:

Re: 1978 Kiss Machine

Post by ralphwiggum »

Take a look at the link I posted. It explains what you are looking for in switch test.

Did this machine work previously?
Current Collection
Demolition Man, Genie, Pennant Fever, Sinbad, Teenage Mutant Ninja Turtles, Fish Tales, Wheel of Fortune
Pinball_Rookie
Posts: 7
Joined: Mon Nov 05, 2018 2:21 pm
Location: Oshkosh, WI
Contact:

Re: 1978 Kiss Machine

Post by Pinball_Rookie »

Yes, it did work previously. Is it possible something got jarred in transit? I wasn't able to determine anything with the switches. Know anyone in the greater Oshkosh Wi area that has some troubleshooting/repair skills?
Eric_S
Posts: 499
Joined: Sat Jan 18, 2014 9:02 am
Location: Oshkosh, WI
Contact:

Re: 1978 Kiss Machine

Post by Eric_S »

Send me a PM with your contact info. I work in Oshkosh and can probably take a look at it.
Post Reply